Mon–Fri 8:30am–6pm · Sat 9am–5pm · we reply within minutes · 1 The Links, Herne Bay CT6 7GQ

info@hiveepcs.co.ukCheck your EPC →Latest EPC news

WhatsApp us

Advice ·

6 min read

Common EPC Mistakes, and How to Check Your EPC Is Right

The most common EPC mistakes, and what to check before and after your EPC is lodged so it reflects your home.

Bruce Adams DipDEA · Quidos-accredited energy assessor

First published

· Updated

Hive EPCs assessor carrying out a thorough, accurate EPC assessment — the quality EPC assessor Kent property owners recommend

An EPC is only as good as the information that goes into it. Most certificates are produced carefully, but an assessment is a short visit, and the rating depends on what the assessor can see, measure or prove on the day. When something is missed or assumed, your home can end up with a lower rating than it deserves, or a certificate that doesn’t describe it properly at all.

Here are the mistakes we come across most often, and the simple checks that help you get an EPC that’s right first time.

The most common EPC mistakes

Wrong address. EPCs are sometimes lodged under the wrong flat number, a slightly different address or the wrong building. That matters when you sell or let, because buyers, tenants and agents search the register by address. You can check your EPC by postcode to see exactly how yours is listed.

Wrong property type or built form. A detached house recorded as semi-detached, a bungalow as a house, or a maisonette as a flat changes how much of the home is treated as exposed to the outside, which affects the rating.

Heating system wrongly identified. The heating system has a big effect on the score. A modern condensing boiler recorded as an older type, the wrong kind of storage heater, or a heat pump that isn’t recorded with its details can all pull a rating down.

Floor area and measurements. Rooms missed, a conservatory or extension left out, or measurements taken from the wrong points can all change the result.

Extensions and loft conversions missed or merged. An extension or a room in the roof is usually built differently from the original house, often to a much better standard. If it isn’t recorded as its own part, with its own age and construction, the better insulation may not be credited.

Improvements assumed rather than recorded. Cavity wall insulation, loft insulation, floor insulation, newer windows and solar panels can be missed if they can’t be seen or there’s no evidence on the day, and the software then falls back on assumptions based on the age of the building.

Above all: checking the records

The single biggest cause of an EPC that undersells a home is time not being taken to check what’s on record. Local planning applications and building control completion certificates often show when an extension or loft conversion was built and to what standard. Window installation records and installer certificates show when glazing was replaced. Without them, an assessor may have to assume the oldest, least efficient option.

You can help by having the paperwork ready, and by asking whether your assessor will check the planning and building control records for your address.

What to have ready before your EPC

  • Planning approvals and building control completion certificates for any extension, loft conversion or conversion work
  • Window and door installation certificates (for example FENSA or Certass)
  • Guarantees or certificates for cavity wall, loft or floor insulation
  • Paperwork for your boiler or heating system, and any heating controls you’ve added
  • For solar panels, the installation certificate and system details (we explain why on our solar PV page)
  • Photos taken during building work, especially of insulation that’s now hidden

Not every document will count, because the recording rules decide what can be used as evidence, but it’s always worth having them to hand.

Checks to make on the day

Ask the assessor to go through every part of the building. Walk through the main house and each extension, loft conversion or room in the roof, and check what’s being recorded for the walls, roof or loft, floors and windows of each part.

Ask about anything that isn’t being included, and why. Sometimes there’s a good reason, such as not being able to see or prove something. If an extension, insulation or a heating feature isn’t going in, it’s reasonable to ask why, and you should be happy with the answer before the certificate is lodged.

Point out what can’t be seen. Insulation under floors, inside walls or behind boarding is invisible on the day. If you know it’s there, say so and show the evidence.

Checks to make before it’s lodged

Ask to see a preview or a summary of the inputs. Many assessors will happily talk you through what’s been recorded, or show you a draft, before the EPC goes on the register. Check the address, property type, heating system, floor area and each building part.

Once a certificate is lodged, a newer EPC replaces it, so it’s far easier to get details right beforehand. If you’re a landlord close to a band boundary, a draft EPC lets you see the likely rating before anything is lodged.

If you think your EPC is wrong

Start with the assessor who produced it, whose details are on the certificate. If you’re still unhappy after that, each certificate also names the assessor’s accreditation scheme, which you can contact.

If you’d like an independent look at whether an existing certificate undersells your home, our EPC Review checks your EPC against the records and paperwork and explains what may have been missed. For homes in East Kent, Maidstone and Medway, we can also carry out a new EPC and lodge it the same day as the visit. Not sure which kind of certificate your property needs? See our guide to domestic, new build and commercial EPCs.

How we approach every EPC

We’re a small, Quidos-accredited team and we’ve assessed more than 20,000 Kent homes since 2008. We take the time to go through every part of the building, check the planning and building control records and ask about the paperwork, because an accurate EPC can make a real difference to a sale, a let or a landlord’s plans for 2030. Get a quote or read how to choose an EPC assessor.

Questions about EPC mistakes

Can an EPC be wrong?

Yes. Most are produced carefully, but an EPC can only reflect what was recorded on the day. Common problems are the wrong address or property type, a heating system recorded incorrectly, missed floor area, and extensions or insulation that weren’t recorded because they couldn’t be seen or proved.

Can I see my EPC before it’s lodged?

Ask your assessor. Many are happy to talk you through what’s been recorded, or show you a preview or summary, before the certificate goes on the register. It’s the easiest time to spot a wrong address, property type or missing extension.

Does the assessor check planning and building control records?

It depends on the assessor, so ask when you book. These records can show when an extension or loft conversion was built and to what standard, which can affect how it’s recorded. We check them as part of our assessments.

What should I do if my EPC has the wrong address?

Contact the assessor who produced it; their details are on the certificate. If that doesn’t resolve it, contact the accreditation scheme named on the certificate.

Will a new EPC replace a wrong one?

Yes. The newest EPC for a property is the one that counts, so a new, accurate assessment replaces the old certificate.

About the author

Bruce Adams DipDEA is a Quidos-accredited domestic energy assessor and founder of Hive EPCs. He has carried out and overseen more than 20,000 EPC assessments across Kent since 2008.